Do you know what Shirnk Pepper is?
Shirn paper is paper that is printed by regular or inkjet printers. When it is inserted into the convection oven, it loses 50% of its normal size, making the paper
It turns into high thickness, charming and wonderful paper that can be used in buttons - jewelry - pocket names - medals - comments and others
And be sure that this paper will increase your wonderful products, God willing
Note: Use glue pad with translucent embossing powder to protect the design and add flair to your work.
Read the instructions before starting
- Print the desired design on any inkjet printer and it is preferable to experiment initially on a single sheet of paper before printing the entire set
- Cut around the design and a hole can be made at the top of the design if you want to make a medal or chains
- Preparing the oven 150-180 degrees, which is approximately 300-350 degrees Fahrenheit, before inserting the paper, and it is preferable to test the appropriate temperature by doing experiments
- Put cooking paper, heat-resistant paper, or silicone sheet, then place the shrink sheet on it, and then place another sheet on top of the design, and use gloves when handling
- with it before it cools down
- The paper is placed 1-2 minutes inside the traditional oven or convection oven until the paper stops shrinking
- Microwave oven cannot be used with this product
design tips
- It must be taken into account that the design will lose the middle, which means when heated, it will shrink by 50% of its normal size and be thicker and more solid.
- Colors will darken upon heating
- Use glue pad or acrylic stamp with translucent embossing powder to protect the colors
Tips when using the oven
- Place the shrink sheet between two heat-protected sheets, such as silicon chit
- Your use of silicone sheet to protect from sticking or tangling during shrinkage, if clinging or tangling occurs, take it out of the oven and use a spoon or tongs to remove the adhesion and then put it in the oven again until complete shrinkage or complete shrinkage
- When you take it out of the oven, the paper is still easy and can be flattened or shaped
- To heat evenly when taken out of the oven, turn the sheet over to cool. Be careful with high heat. Use any heavy object to flatten the sheet.
- For greater heating, lower the temperatures until the shrinkage speed decreases and the distortions produced during shrinkage are reduced and make sure that the paper will not shrink properly and there should be some slight distortions
additional information
- There are some difficult shapes that may intertwine with each other due to shrinkage, you should use a heavy silicone sheet or twist the paper so that it is thicker, the aluminum pan works great, but because of its light weight, the paper may be difficult to control during shrinkage, try to lower the heat and work slower and this It may help a lot of work and it is preferable to do experiments to reach the best results
- Do not try to put more than 3 cards at a time until you gain enough experience
- The heat gun can be used with shrink papers, and the control is more by using the tip of the paper with tweezers until the shrinkage is finished
very important
When children use paper, there must be adult supervision
